Our Products

Full Eject Series

The Full Eject Series was specifically designed for low volume users with the possibility of baling a wide range of materials. NF4560-1050.

Full Eject Series Specifications

Production Volume: Up to 12,800 Cubic feet / Hour
Feed Opening: 35″ x 57″ or 45″ x 57″
Cycle Time: Min. 29.4 secs. Max. 20.9 secs.
PSI: Up to 235,620# of force
Expanded Bale Size: 30″h x 45″l x 60″w

PAC Series Horizontal Baler

American Balers PAC Series horizontal baler was designed for use in printers, box plants, document destruction, textile and etc. Material can be air conveyed or mechanically conveyed. Our PAC Series produces a mill or export size bale from material that is primarily either trim, shredded or die cuts.

PAC Series Specifications

Production Volume: Up to 20,000 Cubic feet / Hour
Feed Opening: Min. 30″ x 27.5″; Max. 50″ x 27.5″
Cycle Time: Ranges from 7.0 secs. to 28 secs.
PSI: Up to 150,795# of force
Expanded Bale Size: 30″w x 43″h x var. l
Production Capacity: Range – 1 TPH to 15 TPH

29N Single Ram Series Baler

The 29N Single Ram Series baler was designed for applications where tough materials like single/double/triple wall OCC shreds and trim, DLK, signatures, plastics and beverage cans are being baled and maximum bale density is required. These 29N Series balers are available with or without a shear blade and can be conveyor fed or fed with an air conveying system.

29N Series Specs

Production Volume: Up to 17,650 Cubic feet / Hour
Feed Opening: 50″ x 27.5″
Cycle Time: Ranges from 9.5 secs to 26.2 secs.
PSI: Up to 235,620# of force
Expanded Bale Size: 30″ x 43″ x var.
Production Capacity: Range – 3 TPH to 16 TPH

DC Balers

Specifically designed for Distribution Centers. The DC Balers were designed specifically for facilities who handle whole upright boxes. We also have the 42WS Series that can handle flattened corrugated boxes. The DC Balers can be used with shredders in high volume applications.

DC Baler Specs

Production Volume: Up to 31,350 cubic feet / hour
Feed Opening: Min. 50″ x 43″ up to Max. 75″ x 46.5″
Cycle Time: Min. 28 secs. – Max. 8 secs.
PSI: Up to 235,620# of force
Expanded Bale Size: 43″ x 43″ x var. up to 43″ x 48″ x var.
Production Capacity: Min. 2 TPH up to 20TPH

42W Series Single Ram Horizontal Baler

42W Series single ram horizontal balers are designed for small to medium sized MRF’s, Transfer Stations, Paper Brokers, and Printers / Converters. The 42W Balers are also used in Distribution Centers for set-up and flattened cartons since the wide mouth feed openings are ideal for these applications. The 42W Balers are available with three different feed opening sizes, three cylinder sizes, and six motor HP sizes and each of these models is available with or without shear blades. This makes the 42W Balers ideal for these baling applications.

42W Baler Specs

Production Volume: Up to 28,000 Cubic feet / Hour
Feed Opening: Min. 50″ x 40.5″; Max. 72″ x 40.5″
Cycle Time: Ranges from 8.8 secs to 27.5 secs.
PSI: Up to 235,620# of force
Expanded Bale Size: 43″ x 43″ x var.
Production Capacity: Range – 5 TPH to 25 TPH

43HS Balers

The 43HS Balers are designed for medium to large sized MRF’s, Paper Brokers. Handles OCC, printers mix, Office Paper, Newspaper, Plastic and light aluminum. With a 43 x 43 cross section the 43HS Balers will maximize bale weights with high production thru-put numbers.

43HS Baler Specs

Production Volume: Up to 38,000 Cubic feet / Hour
Feed Opening: Min. 54″ x 43″; Max 73″ x 43″
Cycle Time: Ranges from 9.1 secs to 24.1 secs
PSI: Up to 339,290# of force
Expanded Bale Size: 44″ x 44″ x var
Production Capacity: Range – 7TPH to 50 TPH

Automatic Baling Machine

American Baler builds the single ram automatic baling machine with the following features that are suitable for most paper recycling applications.

If you are a paper or plastic recycler American Baler will have a single ram automatic baling machine that will meet your needs. Plus we offer the best baler warranty in the business!

  • Several charge box opening lengths
  • 29”, 42” 43” and 48” charge box widths
  • 7”, 8”, 9” 10”, 11”, & 12” cylinder bore sizes for additional bale density and shearing force
  • 9 power unit sizes for faster ram speed and additional hourly production
  • E-PAC TEFC Motor 460/3/60 – XL Starting
  • IEC Componentry
  • NEMA -12 Electrical Enclosure
  • UL & CUL Listed Electrical Components
  • Allen Bradley CompactLogix PLC with 10″ Touchscreen operator interface
  • Pushbutton Controls
  • Infrared Cycle Control
  • Single electrical panel on 30HP models
  • Thermostatically controlled Air-to-Oil heat exchanger
  • Trunnion Mounted Main Cylinder
  • Manifold Hydraulics with Regen Circuit
  • 10 Micron filtration with replaceable filter element
  • Replaceable tank breather filter
  • Single Cylinder Bale Tension System with 4-Way Free Floating Design
  • Bushed tension links with grease fittings (10” models only)
  • Swing-Away Hydraulic 5-Wire Auto-Tier Mounted on Poly-Clad Wheels
  • Box Type (Fixed) 100# Wire Holders
  • Replaceable Hardox 500 Floor Liner
  • Feed Chute w/Gasketed Door & Window
  • Oil heater
  • 3HP conveyor controls
  • High level infrared
  • Hot Oil Indicator & Shutdown
  • Low Oil Indicator & Shutdown
  • Remote VPN Internet Access
  • 4′ Bale Run-out Table
  • Adjustable Dust Seals on Platen Sides & Top
  • 8 Spring Loaded Retainer Dogs (4 each side)
  • 3-Stage Bolt-in Serrated Shear blade (if applicable)
  • Anchor clips
  • Surface is painted with an industrial primer and 2 coats of industrial enamel
  • Category 3 Compliance

OCC – High Production Horizontal Baler

American Balers model 8072HSL-11225 horizontal baler is designed with a big 80″ x 72″ feed opening to handle bulky OCC fed from any direction with one or more conveyors. The 8072HSL-11225 with a high speed side ram bales more material per ram stroke resulting in increased OCC hourly production and produces an “export” bale size that can be easily loaded into sea containers.

8072HSL-11225 Specifications

Production Volume: Up to 47,000 cubic feet per hour
Nominal Feed Opening: 80″ x 72″
Maximum Ram Force: 332,620#
Expanded Bale Size: 44″ x 44″ x var
OCC Production Capacity: up to 30 TPH

WB Two Ram Baler Series

Our Wide Box Two Ram balers offer an economical solution for paper brokers and recyclers who have multiple grades that need to be baled. The WB Series is available with 6′ and 8′ feed opening lengths and multiple HP options.

WB Series Specifications

Production Volume – Up to 39,055 Cubic Feet per Hour
Feed Opening – Up to 96″ x 86″
Cycle Time – As quick as 10.2 seconds (no-load)
PSI – Up to 279 or 452,389 lbs of force
Expanded Bale Size – 30″ x 45″ x 60″ The 45″ dimension can vary.
Bale Weights (Avg) OCC – Up to 1400#
ONP- Up to 1800#
UBC – Up to 1100#
Production Capacity – Up to 20 TPH of OCC

NB Two Ram Baler Series

The NB Series Two Ram baler is specifically designed to be a versatile machine that can handle multiple grades of material. The NB Series gives the operators the ability to have different setups for baling wire to be placed around the bale to hold memory retentive material. The NB Series baler allows for multiple grade setups for baling multiple grades.

NB Series Specifications

Production Volume: Up to 21,430 Cubic feet / Hour
Feed Opening: Min. 65″ x 43″; Max. 90″ x 43″
Cycle Time: Min. 27.6 secs. Max. 11 secs.
PSI: 235,615# of force
Expanded Bale Size: 30″h x 60″l x 45″w
Production Capacity: Range – 3 TPH – 19 TPH

Two / 2 Ram Baler

American Baler builds two ram baler models that are suitable for most paper, plastic and non-ferrous metal baling applications.

If you are a paper, plastic and/or non-ferrous metal recycler American Baler will have a two ram baler models that will meet your needs. Plus we offer the best baler warranty in the business!

Two Ram Baler Features

  • Available with either a 43” wide frame or 60” wide frame
  • Several charge box opening lengths
  • Single side sheet construction
  • Meets all Current ANSI Z245.51 Safety Standards
  • Allen Bradley IEC components
  • EPAct TEFC Motors 460/3/60 – X Line Starting
  • Sequenced motor start-up with Economizer to shut down motors when not in use
  • Allen Bradley CompactLogix PLC
  • Panelview Touchscreen operator interface
  • Across-the-line conveyor motor starter (up to 10HP) and controls to optimize production
  • UL Approved NEMA 12 Electrical Enclosures
  • Operator controls mounted in MCC
  • Dual Infrared Cycle Control (Diffused)
  • Laser positioning
  • Pressure Transducer
  • Remote VPN Internet access
  • Left hand or right hand eject available
  • Manifold hydraulics with Regen
  • Hi-Lo vane pumps
  • Versa-Door w/transducer
  • Dual Infrared Cycle Control (Diffused)
  • Shimmable Serrated AR Shear Blade
  • Shear Beam Mounted at 9° Rake
  • Trunnion mounted main and eject cylinders
  • Full Main Ram Penetration
  • Hopper Access Door w/Safety Switch
  • Adjustable ram hold down bars
  • High/Low Floor
  • Replaceable Hardox 500 Floor and Ram Liner Strips alternating ½” to 1”
  • Replaceable ¼” Hardox 500 charge box side liners and press box side and top liners
  • Replaceable Hardox 500 Platen Strips
  • Bale table to support ejecting bale
  • Air-to-oil cooler
  • Tank Heater
  • Hot & Low Oil Shutdown
  • Accent 470 Wire Tier
  • Dust Cover for Wire
  • 1 – Stem of Galvanized Wire (11 or 12 Ga.)
  • Surface is painted with an industrial primer and 2 coats of industrial enamel
  • Anchor clips
  • Optional 12.4 or 18.8 ton hydraulic stamper at shear
  • Optional Plastic Strapper
  • Category 3 Compliance

If you are non-ferrous metal recycler American Baler will have a two ram metal baler model that will meet your needs. Plus we offer the best baler warranty in the business!